Agilent Technologies aurora Duet User Manual page 68

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
COMMS SETUP
TRACER SETUP
GENERAL SETUP
5 - 2
T1 SETUP
BERT SETUP
This screen is accessed from
the MAIN SETUP menu. It
allows you to set up a series
of communication settings for
aurora , such as parity and
Duet
the baud rate.
This screen is accessed from
the MAIN SETUP menu. It
allows you to determine the
tracer output of the selected
monitor.
This screen is accessed from
the MAIN SETUP menu. It
allows you to specify the
settings for the Physical Layer
T1 interface. These settings
are different depending on
whether your aurora
Duet
operating in SIMULATE or
MONITOR mode.
These screens are accessed
from the MAIN SETUP menu.
There are four screens, all
with the same options,
allowing you to define up to
four different combinations of
settings for Bit Error Rate
testing.
This menu is accessed from
the MAIN SETUP menu. It
accesses a number of screens
used to define settings that
you are unlikely to change
very often, for example, the
real time clock. The actual
screens that you can access
depend on whether aurora
is in MONITOR or
SIMULATE mode.
428856
is
Duet