Agilent Technologies aurora Duet User Manual page 154

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
8 - 6
Allows you to switch Call Appearance
CALL APP
ON and OFF. A Call Appearance
Identifier between 1 and 264 (AT&T)
or 1 and 126 (NI or Nortel) is sent in
the SETUP message when a call is
made.
aurora
Appearance Identifier whenever you
make an outgoing call.
When you have selected
SEALING
U INTERFACE and LT mode, this lets
CURRENT
you switch the sealing current ON and
OFF. The charger must be connected
to supply NT power. For more
information on sealing current, see
Chapter 2.
When you have selected
OPTIONAL
U INTERFACE and LT mode, this lets
POWER
you switch optional power ON and
OFF. The charger must be connected
to supply NT power. For more
information on optional power, see
Chapter 2.
When you have selected S
PS1
INTERFACE and NT mode, this lets
GENERATION
you switch PS1 (power source 1) ON
and OFF. The charger must be
connected to supply NT power.
When aurora
power sources are automatically set
back to OFF. For more information on
power sources, see Chapter 2.
allows you to enter a Call
Duet
is switched off, the
Duet
428856