Table of Contents
Advertisement
Entering fixed B channel TEI values
Issue 2 - 05/00
Allows you to set the Terminal
B TEI
Endpoint Identifier (TEI) to either
FIXED or AUTOMATIC.
If you choose AUTOMATIC, the B
channel TEI values are assigned by the
network.
If you select FIXED, additional menu
items appear for you to enter two
fixed B TEI values.
If you set B TEI to FIXED in BRI mode, or if you are in
PRI mode, you can enter two fixed B TEI values. They
must be in the range 00 to 63.
To enter a B TEI value:
•
Press F3—TEI1 to edit the FIXED B TEI1 line, or
F4—TEI2 to edit the FIXED B TEI2 line. A flashing
cursor appears at the point where you enter the
value.
•
Enter a two digit number, using the keypad.
You must enter two digits before you can exit the line. To
enter a single digit number, enter a leading zero followed
by the single digit. For example, for '4' you would enter
'04'.
Protocol-Specific Setup Functions
8 - 9
Hide quick links:
Advertisement
Chapters
Table of Contents
