T1 Setup Screen (Pri) (Simulate); Setting Up The T1 Interface - Agilent Technologies aurora Duet User Manual

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
T1 SETUP screen
This screen allows you to specify the setup of the Physical
Layer T1 interface.
To display the T1 SETUP screen:
In the MAIN SETUP menu for SIMULATE mode, select
T1 SETUP.

Setting up the T1 interface

To define each setting, move the cursor to highlight it on
the screen and use the LEFT and RIGHT arrow cursor
keys to switch between the available options.
LBO
TX DATA
RX DATA
5 - 18
This allows you to set the Line
Build-Out. You can choose between
0-133FT, 133-266FT, 266-399FT,
399-533FT, 533-655FT, -7.5DB, -
15DB and -22.5DB.
Sets the T1 data transmission. You
can choose between NORMAL and
INVERT. INVERT inverts the entire
T1 payload prior to transmission.
Sets the T1 data reception. You can
choose between NORMAL and
INVERT. INVERT inverts the entire
T1 payload when it is received.
428856