Duet
aurora
Basic & Primary Rate ISDN Tester - User Guide
Starting the test
To begin the Outgoing Channel Test, choose the START
TEST option.
The following screen is displayed:
The test starts at the current channel and continues until
all channels have been tested. Each channel establishes a
call.
On connection of a DATA service test, a BER test is
executed if you have set the AUTO BERT option to ON.
If AUTO BERT is set to OFF, the call disconnects
immediately after connection.
The duration of the BER test depends on the setting of
the TEST LENGTH option in the BERT SETUP menu.
When this option is set to CONTINUOUS the test will
run for 10 seconds.
10 - 22
428856