Removing A Cross Connection; Aurora Duet Date And Time Setup; Checking The Date And Time Setup - Agilent Technologies aurora Duet User Manual

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide

Removing a cross connection

Duet
aurora date and time setup

Checking the date and time setup

4 - 18
• Highlight the second B channel and press F2—
CON. An arrow pointing down appears in the
channel box. This completes the cross connection.
Each channel in the pair displays the number of the
channel to which it is connected, directly below the box.
Note:
You cannot connect a channel that does not already have
a call established, or which is already part of a connected
pair.
• Press F2—CH to display the B CHANNEL
SELECTION screen. Highlight either of the cross
connected channels and press F3—DIS.
The vertical arrow is replaced in both channel boxes by
the symbol for an established call.
If you are a new user, we advise you to use the aurora
setup routines as a tutorial. This will help you become
familiar with the keypad functions, the MAIN menu and
some sub-menus. You will also get used to navigating
through the menu structure.
You need not worry about changing settings or entering
invented data. aurora
and clear unwanted entries. Remember that context-
sensitive help is available at any level by pressing F1.
You can use this procedure to test the setup functions of
your aurora .
Duet
lets you reset factory defaults
Duet
Duet
428856