Making Calls and Testing
You can use aurora
control protocol, check that data transmission is possible
and that the quality is acceptable over an established
connection.
Note:
The functions described in this chapter are only used in
SIMULATE mode.
Chapter summary
This chapter describes:
•
•
•
•
•
•
Note:
The functions described in this chapter are independent
of the protocol you are using. In addition to these
functions, there are a number of call setup features that
are protocol-specific. You will find information about
these services in Chapter 10.
Notes on voice calls
Although the ISDN Basic Rate is capable of two
simultaneous calls, which may both be voice calls,
aurora
time, because there is only one microphone/earphone set.
The second call will be looped so that you can switch
Issue 2 - 05/00
to test the operation of the call
Duet
how to make and answer data and voice calls
Unattended mode and how it can be used
BER testing
Physical Layer testing
how to display the status of the T1 interface
how to view stored BERT results.
is only capable of testing one voice call at a
Duet
Making Calls and Testing
6
6 - 1