Agilent Technologies aurora Duet User Manual page 110

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
Options for the T1 test
6 - 12
You can choose from the following test options:
Displays the T1 TEST SETUP menu,
T1 TEST SETUP
for more information see below.
ISDN SIMULATE Returns the aurora
menu.
Sets the alarm to be sent in the test.
TX ALARMS
You can choose between: NONE, AIS
and YELLOW.
Starts a BER test.
BER TEST
Sets the test pattern for the BER test.
PATTERN
You can choose between: Binary 0,
Binary 1, 1:1, 1:3, 1:7, 3:1, 3:24,
63p.r., 511p.r., 2047p.r., 2^15-1p.r.,
2^15- INV, 2^20-1p.r., 2^20 QRSS,
2^23-1p.r., 2^23-1 INV, 55 octet,
T1 Daly, USER DEF and NONE.
Specifies the rate at which errors are
ERROR RATE
inserted into the BER test stream
when you select automatic error
insertion during the test. You can
choose between:
1 in 10^2, 1 in 10^3, 1 in 10^4,
1 in 10^5 and 1 in 10^6.
Specifies which slots to use in the test.
FRACT T1
You can choose 56K, 64K or ALL. If
you choose 56K or 64K, press
SELECT to display a screen allowing
you to choose a channel for the test.
Function keys
F2 Loop up - if you have selected a local
LU
loopback establishes a local loop. If you
have selected an in-band or out-of-band
sends a signal to the network requesting
that a loop is established.
to the MAIN
Duet
428856