Table of Contents
Advertisement
SPID ENTRY screen
Issue 2 - 05/00
•
Highlight NUMBER and type a CLID of up 20
digits. This may include a sub-address preceded by
an asterisk (*). A flashing cursor appears at the
point where you enter each digit. To erase the
CLID, press F4—CLR.
•
Highlight PRESENTATION and use the LEFT and
RIGHT arrows to toggle between ALLOWED,
RESTRICTED, INTERWORK, RESERVED and NOT
PRESENT.
•
Press F6—EXIT to save the CLID and return to the
DIAL SETUP menu.
A Service Profile Identifier (SPID) is used by the terminal
equipment to identify itself on the network on point-to-
multipoint connections. It is included as an information
element in outgoing calls.
This screen lets you enter, view, edit and store two 16
digit SPIDs.
To display the SPID ENTRY screen:
In the DIAL SETUP menu, select SPID. You can also
display the screen by pressing F5—SPID in the MAIN
menu.
Dial Setup for aurora
Duet
9 - 7
Hide quick links:
Advertisement
Chapters
Table of Contents
