Inputs / Outputs; Configuration Of Inputs - RADWAG WLY User Manual

• Signalling mass above the set value of Qn+2T:
Caution:
In case of additional declaring the values for MIN, MAX limits, the "control"
bargraph refers to the MIN, MAX limits and the nominal mass, but without
displaying the errors for T and 2T.

18. INPUTS / OUTPUTS

PUE 7.1 weighing indicator are equipped with 4 inputs / 4 outputs. To adjust
software to the users needs configure inputs outputs in the submenu
in the submenu <
•
indicator inputs,
•
indicator outputs.
In order to enter submenu <
:
and then „ Inputs / Outputs".

18.1. Configuration of inputs

Procedure:
• Enter <
• Choose <
a list of functions to ascribe,
• Choose the required function from the list and return to weighing
saving the changes according to ch. 12.2 of this manual.
Caution:
The list of functions to ascribe to inputs are described in APPENDIX B
of this manual. By default inputs have no ascribed functions <None>.
Inputs / Outputs>:
Inputs / Outputs> according to ch. 18 of this manual,
Inputs> and enter the selected input you will see
MIN
Inputs / Outputs>, press
83
Qn
MAX