Table of Contents
Advertisement
1. INTENDED USE
Scales are the response for the market demands concerning simplicity
of operation and high functionality. They are intended for quick and precise
weighing in industrial and laboratory conditions. The state-of-the-art
weighing terminal with TFT 5.7" colorful graphic displays with touch
panels allows for intuitive operation without using keys.
Scales are equipped with 2 USB interfaces, 2 RS232 connectors, port
Ethernet, 4 inputs /4 outputs (digital) and Wi-Fi b,g,n. They can cooperate
with barcode scanners, receipt printers, label printers, transponder card
readers (RFID) and standard PC equipment: mouse, keyboard, pendrives
(limited use).
2. PRECAUTIONARY MEASURES
A. Please, read carefully this user manual before and use the device
according to its intended use;
B. Weighed loads should be placed in possibly central part of scale pan;
C. Do not clean the device with agents causing corrosion;
D. Weighing pan should be loaded with goods having gross mass lower
than maximal capacity of the scale;
E. Do not leave loads on the pan for longer period of time ;
F. In case of failure, immediately disconnect scale power supply;
G. Devices that are to be withdrawn from usage should be utilized
according to the law.
3. WARRANTY CONDITIONS
A. RADWAG is obliged to repair or change those elements that appears
to be faulty because of production and construction reason,
B. Defining defects of unclear origin and outlining methods of elimination
can be settled only in participation of a user and the manufacturer
representatives,
C. RADWAG does not take any responsibility connected with destructions
or losses derives from non-authorized or inappropriate (not adequate
to manuals) production or service procedures,
9
Advertisement
Table of Contents
