Reference Unit Mass Estimated By Weighment; Reference Unit Mass Inscribing Into The Memory; Working Modes - Dosing - RADWAG WLY User Manual

27.3. Reference unit mass estimated by weighment

Procedure:
• Enter <
• If the standard is to be weighed in a container, the container needs
to be put on the pan and tarred,
• Press
<Put standard>,
• Put the load on the pan. After stabilization the result is taken
as a standard (symbol
• At the same time the weight unit is changed to (w %).

27.4. Reference unit mass inscribing into the memory

Procedure:
• Enter <
• Press
<Give piece mass> together with the screen keyboard,
• Enter a value and confirm by pressing
• At the same time the weight unit is changed to (w %).

28. WORKING MODES - DOSING

< Dosing> mode enables carrying out filling and dosing processes of
goods on scales featuring a scales of Y series. The working mode enables
manual and automatic dosing on a single or simultaneously
on many weighing platforms.
Deviations> according to ch. 27.1 of this manual,
(Estimate standard mass), then a message is displayed:
Deviations> according to ch. 27.1 of this manual,
(Give piece mass), then an editing field is displayed
). Confirm it by pressing
126
,
,