Proximity Sensor; Ogging In Required - RADWAG WLY User Manual

Procedure:
• Enter submenu <
• Select <
window with an on screen keyboard is displayed,
• Enter required time value in [s] and press

21.9. Proximity sensor

The user can specify sensitivity for proximity sensors operation (sensors
operation dependant on distance between the sensor and operator's hand).
Procedure:
• Enter submenu <
< Proximity sensor> parameter and set appropriate option.
Where:
0
1 ÷ 9
21.10. Logging in required
< Logging in required> parameter must be active if a logging operation
is to be carried out by an operator after the device have been turned on.
Procedure:
• Enter submenu <
< Logging in required> parameter and then set the appropriate
option.
Where:
- Inactive logging required
- Active logging required
Others> according to ch. 21 of this manual,
Screen timeout> submenu, <Screen timeout> editing
Others> according to ch. 21 of this manual, select
- Sensors operation disabled
- Sensitivity values range (the higher value,
the broader sensors response range)
Others> according to ch. 21 of this manual, select
96
button to confirm.