Update From Pen Drive - RADWAG WLY User Manual

• After downloading the update press an active
is followed by displaying a message:
• Accept the message by pressing
with update installing procedure.

23.2. Update from pen drive

Procedure:
• Copy file "update.pue71" containing the current software version onto
the external data storage device (to the main catalogue),
• Connect the data storage device to terminal's USB port,
• Go to submenu <
manual,
• Go to parameter <
following message: "Update?",
Caution:
In case the data storage device is not connected to the terminal's USB
port and/or there is no „update.pue71" file in the main catalogue of the
pen drive, the software displays the following message "Update error".
Update> in accordance with point 23 of this user
Update From pen drive> which displays the
104
key which
key. The terminal shall restart