Inputs / Outputs - RADWAG UYA 3Y User Manual

30. INPUTS / OUTPUTS

Application of inputs:
The set of inputs is used to control balance's operation. Each of 4 inputs is
connectable to the following functions or keys:
o Checkweighing thresholds
o Target value
o Profile
o Adjustment/Calibration
o Zero
o Tare
o Set tare
o Disable tare
o Restore tare
o Packaging
o Print
o Header printout
o Footer printout
o Universal variable 1 ÷ 5
o Accept
o Abort
o User
o Left door
On changing the logic status of the input system, e.g. from [0] to [1] a function
that is assigned to the system is carried out. For instance:
o Carrying out automatic adjustment process to check balance's accuracy,
o Displaying the value of set checkweighing thresholds, or
o Restoring tare value to weigh net mass of measured load.
Procedure
- Press
- Enter submenu <
- Enter editing mode of a selected input, which opens list of available
functions,
- Select a function from displayed list and return to weighing.
key and press: "
Inputs / Outputs>, select and press <
o Right door
o Parameters
o Statistics
o Add to statistics
o Product
o Warehouse
o Client
o Parts counting: give part mass
o Parts counting: set mass of a single
part
o Percent setup: give reference mass
o Percent setup: set 100%
o Density of solid
o Density of liquid
o Air density
o Control mass comparator's robot
o Task
o Reference standard
Inputs / Outputs" key.
- 156 -
Inputs> key