19.7. CPG
The user may set authorization levels when it comes to modification of the
following local parameters values of <
• Batch number,
• Number of batches,
• Number of samples,
• Average tare estimation,
• Tare,
• Density.
Procedure:
•
Enter parameters group <
manual, select <
Accessible authorization levels:
None, Operator, Advanced Operator, Administrator.
20. UNITS
Scale, in submenu <
• Declaring accessibility of the weighing units,
• Declaring the start unit,
• Determining two user defined units (custom units),
• Changing the value of g-cor (the value of gravitational acceleration
force).
To enter submenu <
20.1. Units accessibility
Submenu <
be accessible for selecting in the weighing window after pressing the weighing
unit pictogram.
CPG> and then set a right option.
Units> enables selecting:
Units>, press
Accessibility> enables declaring weighing units that should
CPG> operating mode:
Access level>, according to ch. 19 of this
and then
89
:
„
Units".