Table of Contents
Advertisement
Product
Do a series of
weighments
Mode
Threshold
Set MIN and MAX
Zero
Tare
Edit lot number
Edit batch number
Information window
Name
Description
Image
Button
Add custom variable
Type of variable
Name
Assign to custom
variable
Edit product
Selection of a demanded position out of product
chart (default database). This function is
dependent form declared database.
Function inducing execution of a particular
weighments series.
Weighments series mode
Number – execution of a particular number of
weighments
Mass – weighing-out a determined mass.
None – no limit for number of weighings and no
weight limit
Declaration of either weighing number or mass
value, depending on the weighments series mode
Function setting MIN, MAX thresholds of
checkweighing
Function of platform zeroing, identical like
button of the terminal
Function of platform tarring, identical like
button of the terminal
Function editing a lot number
Function editing a batch number
Function inducing freely designed information
window
Information window name, located at the top bar
of the window
Information window description
Information window image. Possible choices: <
information>, <
Warning>, <
Declaration of buttons for an information window.
Possible choices: „Ok" or „Ok | Cancel"
Function inducing a new custom variable. This
variable is automatically saved in a report
(weighments database) upon the end of a process.
Declaration of custom variable type. Possible
choices: text variable, numeric variable.
Custom variable name.
Assigning of a custom variable to a proper custom
variable of the weighing database reports. Possible
values range from 1 to 255.
Function inducing change (edition) of variables for
a given product. It is omitted if during previous
steps of the process the product has not been
chosen.
236
0
T
Error>.
Advertisement
Table of Contents
