Table of Contents
Advertisement
• Enter the required working mode and choose <
set the required option.
Where:
-
-
• On loading the weighing pan with changeable force, the displays locks
the indication of the maximum measured force. The locked value is
signalled by red colour of the displayed value.
• Remove load from the weighing pan.
• Before carrying out the following measurement press
24.10. Information about saved measurement
The user can activate message informing on the fact that a particular
weighing result has been recorded in a database, the message is displayed
each time after performed measurement.
Procedure:
• Enter submenu <
manual,
• Enter „Weighing" mode and activate option: <
saved measurement>,
• Each time after completed measurement the message <Measurement
saved> is displayed.
Caution:
The message is displayed as long as value of <
preview time> parameter specifies (read point 21.12 of this manual).
Scale operates in standard weighing mode
Scale operates with mode forcing lock of maximum indication
on the display, i.e. peak hold.
Working modes> according to ch. 24 of this
Error information
117
Peak hold> and then
button.
Information about
Advertisement
Table of Contents
