RADWAG WLY User Manual page 114

• Enter the required working mode and choose: „
CC label automatic triggering /
required option:
None
Mass
Number
*) Manual printing of cumulative labels can be done in two ways depending
on the button used:
Printing followed by zeroing label counter or the total mass
Printing without zeroing label counter or the total mass
By default setting button
but activating the button
„ /
For automatic printout cumulative labels of cumulative (CC)
labels counters and total mass variables are always zeroed.
• Confirm the changes by pressing
< Threshold> then <Threshold> window appears with
the screen keyboard,
• Set the appropriate value for automatic triggering CC labels:
−
If parameter <
value of total mass to exceed in order to print the CC label,
- Cumulative label of cumulative labels printout is initiated
by pressing
- Cumulative label of cumulative labels printout is initiated by
exceeding the value set in parameter <
The value is treated as the total from single weighments,
- Cumulative label of cumulative labels printout is initiated by
exceeding the value set in parameter <
The value is treated as the number of single weighments,
Display /
Mode> is set to <Mass> then enter the required
Mode" and then set the
*
or ,
is accessible in the bottom part of the display
can be done in submenu:
Actions" (see ch. 17.2).
and go to parameter
114
Labelling mode /
Threshold>.
Threshold>.