Table of Contents
Advertisement
In case when:
1. The inserted code of the current ingredient is incorrect, and the
ingredient is in formulation composition, the software displays the
following message: <Incorrect Ingredient Code. Ingredient already in
formulation content. Go to this ingredient?>. Accept this message by
pressing
ingredient. If
editing window <Ingredient control > featuring the numeric keyboard for
entering the correct code of an ingredient.
2. The inserted code of the current ingredient is incorrect, and the
ingredient is not in the formulation composition. The software displays a
message: <No ingredient with specified code. Abort?>. On accepting
the message by pressing
ingredient on the list. If
displaying the editing window <Ingredient control> featuring the
numeric keyboard for entering the correct code of an ingredient.
3. If the inserted code of the current ingredient is correct, then the software
displays a message: <Correct Ingredient code> and goes to
ingredient's weighing process.
• The workspace on the display indicates a bargraph denoting mass of
a weighed ingredient of a formulation and the following information:
Process in progress: Test formulation
Ingredient: 1 / 3 [ Ingredient 1 ]
Portion:
Charge:
Completed: 0%
Where:
Process in progress:
Test formulation
Ingredient:
[ Ingredient 1 ]
Portion: 0 g
key. The software goes to the weighing process of the
key is pressed, the software returns to displaying the
0 g / -500.0 g
1 / 10
Process status
Name of prepared formulation
Number of weighed ingredient / Total number of
1 / 3
ingredients in a formulation
Name of the weighed ingredient
Current mass of the weighed ingredient
key the software goes to another
key is pressed then the software returns t
147
o
Advertisement
Table of Contents
