Local Setting Of A Working Mode; Editing A Product To Be Controlled - RADWAG WLY User Manual

30.3. Local setting of a working mode

Local settings of the working mode <
a hot-key <
Save mode
Number of accessible controls
Ask for batch number
Password required
Saving notification window
Information about saved
measurement

30.4. Editing a product to be controlled

A product is edited in submenu "
Caution:
In case the scale cooperates with a computer software <
editing the databases from the scale level is blocked. Editing and exporting
product records to the scales is carried out from the level of computer
software.
Procedure:
• Enter submenu "
• Enter database <
Local parameters> in the control settings window:
/
Products> and press required product record.
CPG> are accessible on pressing
Detailed description in ch. 24.1 of the user
manual
Enabling simultaneous carrying out two
control processes (see ch. 30.12 of this
manual)
Function triggering providing batch number
before the start of control
Enabling the parameter requires Logging in
to the scale before each entering the mode
settings window
Protection preventing record of unreliable
results of controlled product measurement.
Value expressed as deviation [%] form
nominal weight of controlled product.
Detailed description in ch. 24.10 of the user
manual
/
Databases".
Databases",
152
E2R System>