Table of Contents
Advertisement
13.5. Weighing for dual range scales
Switching between the I range and the II range happens automatically
(exceeding Max of the I range).
Weighment in the second range is signalled by a pictogram in the top left
corner of the display
of the II range to the moment of returning to zero (autozero range
where the scale switches back to the I range.
Switching between the II range and I range is automatic both in the
switching point the autozero zone. While in AUTOZERO – pictogram
appears. Then pictogram
I range.
13.6. Toggling between weighing units
Operators can change the weight unit in two ways:
• Pressing the unit symbol on the screen,
• Pressing formerly defined button <
Possible selection:
• gram [g]
• kilogram [kg]
• carat [ct]
• pound [lb]
• ounce [oz] *
• Newton [N] *
*)
– weighing unit inaccessible in a verified scale
Caution:
1. The user can also declare the start unit and determine two custom
weighing units (user defined) – see point 20 of this user manual;
2. The procedure of attributing functions to buttons is described in ch.
17.2 of this manual.
. Then weighment is done with the accuracy
is off and a scale returns to weighing in the
46
Change unit>.
)
Advertisement
Table of Contents
