RADWAG WLY User Manual page 191

Caution:
1. Additionally, an operator can:
• Assign a product to a transaction by pressing
• Assign a client to a transaction by pressing
2. Before starting a transaction, first an operator should select a
vehicle to be weighed. Otherwise the scale displays a message
< Vehicle not selected>.
• After the vehicle enters onto the weighbridge (entrance), and stabilizing
of the measuring result, accept the measurement by pressing
ENTER/PRINT button, which opens the following window:
Where:
PL 45332
8880 kg
2013.02.26 8:37
Exit
Confirm weighing 2
0 kg
- A vehicle with saved registration number, accepted
mass on entrance and time and date of entrance
weighment
- Transaction type (exit)
- Message for an operator. The scale waits
for accepting the exit weighment
- Mass of the load
191
button,
button.