Table of Contents
Advertisement
After the test has been completed the test is summarized (see ch. 30.8)
and the results are automatically saved in the database.
Caution:
A pattern and example of the report from estimating average tare are
described in ch. 30.14 of this manual.
30.11. Control in accordance with internal criteria
Select a product with correctly determined parameters for carrying out the
control in accordance with the internal criteria (see ch. 30.4 of this manual).
After entering to scale memory general parameters of the working mode (in
accordance with ch. 30.2 and ch. 30.3 of this manual), start control process
by pressing
key (control start) located in the bottom bar of the mode
settings window.
The scale automatically displays a window with data on set control
parameters:
Accept the message box by pressing
key which causes moving to
the control process. During control process the software carries out real-time
monitoring of the measurement results and displays them it the corresponding
fields of the display for informing the operator on control result:
167
Advertisement
Table of Contents
