Table of Contents
Advertisement
Procedure:
• For a chosen button set one of three functions:
Select an identification process
Select an identification process by name
Select an identification process by code
• Go back to the main window,
• Press programmable button and select an appropriate identification
process to activate it.
3
6.3.2.
Activation by operator logging
User may assign an identification process to an operator. It results in
automatic start of a process right after the logging procedure has been carried
o
ut.
Procedur
e:
• Enter submenu: „
appropriate position,
• Go to <
process, than go back to the main window.
• Log in as an earlier edited operator, and wait for an automatic activation
of an identification process assigned to this operator to proceed.
3
6.3.3.
Activation by product selection
User may assign an identification process to a product. It results in automatic
s
tart of a process right after a product has been selected out of a database.
Procedur
e:
• Enter submenu: „
appropriate position,
• Go to <
process, than go back to the main window,
Databases /
Identification process> field and select a demanded
Databases /
Identification process> field and select a demanded
Operators" and select an
Products" and select an
238
Advertisement
Table of Contents
