Minimum Reference Mass; Setting A Reference Unit By Entering Known Piece Mass - RADWAG WLY User Manual

Caution:
While the parts counting function is active the functionality of
is changed. Pressing
weighments.

26.2.2. Minimum reference mass

Users before beginning the procedure of single piece mass evaluation can
declare "minimum reference mass" i.e. minimum total weight of all pieces
put on the scale pan expressed in reading divisions.
Procedure:
• Enter parameter group <
24 of this manual,
• Choose „
and then set an appropriate value.
Accessible settings: 1 d, 2 d, 5 d, 10 d.
Caution:
While the procedure of evaluation the mass of single piece the mass
of all pieces put on the pan is lower than the value declared in parameter
„ Minimum reference mass", the following warning message will
be displayed: < Too low sample mass>.

26.3. Setting a reference unit by entering known piece mass

Procedure:
• Enter mode <
of this manual,
• Press
<Reference Unit> with the screen keyboard,
• Enter a value and confirm it by pressing
< Parts counting > with automatic setting the reference unit.
Parts counting /
Parts counting> according to ch. 26.1
(enter piece mass), then an editing field is displayed
does not result in printing and saving
It concerns the <
Working modes> according to ch.
Minimum reference mass"
122
Parts counting > working mode
, which causes starting
button