Table of Contents
Advertisement
• Accept the message box by pressing
mode.
<
start mass of platform 1.
Caution:
The factory adjustment process for platforms 2, 3, 4 is analogical to the one
described above.
22.2. Start mass adjustment
It is possible to adjust only a start mass, it helps to correct the start zero
when the span does not change.
Procedure:
• Enter submenu <
and select: "
• After entering the parameter the following message box appears:
• Take the load off the pan of platform 1,
• Press button
start mass: „Evaluation of starting mass",
Setting of start mass> parameter allows to adjust
User Adjustment > according to ch. 22
Setting of start mass",
. The following message appears during adjusting
key and return to weighing
100
Advertisement
Table of Contents
