Table of Contents
Advertisement
16.4.2. Prefix / Suffix
Users can edit a prefix <
to adjust the program to accept transmission frames from the scanner.
Caution:
A special protocol is required in order the code be received by RADWAG
equipment. It is required to program an appropriate prefix and suffix.
Prefix – one byte 01 hexadecimally, suffix one byte 0D hexadecimally.
The detailed description of cooperation scale – barcode scanner can
be found in APPENDIX F in this manual.
Procedure:
• Enter <
• Chose parameter <
keyboard, a required value (hexadecimal) and confirm it by pressing
.
• Chose parameter <
keyboard, a required value (hexadecimal) and confirm it by pressing
.
16.4.3. Field selection
This option is connected with selecting data which the program will search
after reading a barcode.
Procedure:
• Enter <
• Chose „
the following list will be displayed:
Product
Operator
Client
Package
Prefix> or / and suffix <
Barcode Scanner> according to ch.16.3 of this manual,
Prefix> and then enter, using the screen
Suffix> and then enter, using the screen
Devices> according to ch.16 of this manual,
Barcode Scanner /
Field selection" and then
62
Suffix> in order
Advertisement
Table of Contents
