Table of Contents
Advertisement
• Out of a database select an earlier edited product, and wait for
an automatic activation of an identification process assigned to
this operator to proceed.
36.3.4. Example of process forming and its realization
Description:
User must get through the following balance operation algorithm:
1. Carry out the operator logging process with the use of a transponder card,
2. Give a shift number,
3. Zero scales,
4. Information window „Prepare a product to be weighed" (message 60[s]),
5. Select a product by EAN code, use a barcode scanner,
6. Give a present price of a product,
7. Out of a list select „Country of origin",
8. Select client code,
9. Out of a list select „Supplier country",
10. Give a lot number,
11. Give a batch number,
12. Information window „Start a weighing process".
Identification process forming:
• Create a new record <
36.1. of this manual,
• Go to submenu <
process:
Step
1. Add custom variable
2. Zero
3. Delay
4. Select item from
database
Identification process> according to poi
Process creator> to create further steps of the
Function
Variable type: numeric variable;
Name: shift number; assign to
custom variable 1
Zero
Time: 60s; Description: Prepare
a product to be weighed
Database: Product; selection
mode: Standard; start position:
1; end position: 0
Description
Displays „Shift number" dialog window
for edition with a numeric keyboard
Automatic zeroing
Displays window „Prepare product to
be weighed" for 60 seconds
Displays list of products. Configuration
and selection of data with the use of
barcode scanner is described in point
16.3 of this manual.
239
nt
Advertisement
Table of Contents
