Ethernet Setting; Tcp Protocol Setting - RADWAG WLY User Manual

15.2. ETHERNET setting

Procedure:
• Enter <
select <
Following settings are accessible for Ethernet:
• DHCP
• IP Address
• Subnet Mask
• Default gateway - 192.168.0.1
• DNS
• MAC Address
Caution:
1. The above settings are presented for information purpose only.
Transmission parameters have to be selected in accordance with
client's local network settings.
2. Parameter <MAC Address> is automatically assigned to a device
and it is has <Read only> Attribute.
3. In case of declaring the <DHCP> parameter to value
restart, the other transmission parameters have <Read only> attribute.
•
After making changes press
<Restart to apply the changes>,
•
Go back to weighing and restart the device.

15.3. TCP protocol setting

TCP (Transmission Control Protocol) is a protocol for communication
between two computers. It operates in mode client-server. Server awaits
on connection initiation on a specified port while client initiates connection
to the server. Scale software allows setting the port for the „Tcp" protocol.
Communication> according to ch.15 of this manual,
Ethernet> and then set an appropriate value.
- Yes –
- 192.168.0.2
- 255.255.255.0
- 192.168.0.1
- ---
No
key, then a new message is displayed:
51
and on device