Local Setting Of A Working Mode - RADWAG WLY User Manual

29.2. Local setting of a working mode

Local settings for the working mode <
on pressing a hot key <
Ask for multiplier
Ask for number
of cycles
Confirm batching
ingredients manually
Automatic tare
Ingredient control
Local parameters
Select formulation
Start formula making process
Stop formula making process
Select formulation ingredient from the list
Select previous formulation ingredient to to be processed
Select net formulation ingredient to be processed
Set "mass from hand" – mass of an ingredient supplied in ready
packaged and with determined mass
Edit lot number of an ingredient and/or sample of a formulation
ingredient
Local parameters>:
Formulation > are accessible
Causes setting a question for formulation
multiplier, i.e. the number which is used to
multiply the values of mass of all formulation
components.
Causes setting a question on number of
formulation cycles, i.e. number of repetitions of
the same formulation.
Causes enabling manual confirmation by
pressing "Enter/Print" key on terminal's keyboard
for each weighing process.
Enable automatic tarring of mass at the moment
of process start and mass of each following
ingredient after the sampling process.
Enable control mode of an ingredient being
part of a formulation. The "Ingredient control"
mode orders giving correct ingredient code
before its weighing process.
142