Table of Contents
Advertisement
•
Set accessibility attribute for each of the working modes and return
to weighing mode.
24.2. Save mode
Depending on setting parameter <
from the scale to an external device.
Procedure:
• Enter parameters group <
to ch. 24 of this manual,
• Enter the required mode and choose <
the required mode.
Accessible options:
Manual every stable
Manual first stable
Automatic first stable
Automatic last stable
Semi-automatic every
stable
Semi-automatic first
stable
24.3. Down-weighing
Software allows to weigh in the "down-weighing" mode. It consist in putting
the load on the pan and taking off/removing portions of it with concurrent
saving weighments equal to the portions taken off the pan.
Save Mode> users can send data
Working modes> according
-
Manual printout of each stable weighing result for mass
measurement over -LO- threshold
-
Manual printout of the first stable weighing result for mass
measurement over -LO- threshold
-
Automatic printout of the first stable weighing result for mass
measurement over -LO- threshold
-
Automatic printout of the last stable weighing result for mass
measurement below -LO- threshold
-
Manual printout of each weighing result for mass
measurement over -LO- threshold – awaiting for a stable result
-
Manual printout of the first weighing for mass measurement
over -LO- threshold – awaiting for a stable result
108
Save Mode> then choose
Advertisement
Table of Contents
