Starting The Operating Mode; Local Settings Of The Working Mode - RADWAG WLY User Manual

27.1. Starting the operating mode

Procedure:
• While in the main window press
you will see a submenu <Working Modes> comprising a list of modes,
• Choose mode <
returns to the main window displaying icon
• The weight unit is automatically changed to „%" and two screen
buttons on the right side appear:

27.2. Local settings of the working mode

Local settings of the working mode <
on pressing a hot key <
Save Mode
Down-weighing
Checkweighing
Tare mode
Labelling mode
Statistics
Information abort
saved measurement
Ingredient weight
entered manually
Deviations>, the program will automatically
Enter reference mass
Estimate reference mass
Local parameters>:
in the top bar of the window then
Deviations> are accessible
Detailed description in ch. 24.2 of the user manual
Detailed description in ch. 24.3 of the user manual
Detailed description in ch. 24.4 of the user manual
Detailed description in ch. 24.5 of the user manual
Detailed description in ch. 24.6 of the user manual
Detailed description in ch. 24.7 of the user manual
Detailed description in ch. 24.10 of the user manual
Detailed description in ch. 24.11 of the user manual
125
,
in the top bar