Table of Contents
Advertisement
Procedure:
• Enter <
in chapter 16 of this manual,
• Select: „
with the screen keyboard,
• Enter the required number and press
Caution:
The number of TCP port in RADWAG instruments is set to default value:
4001.
15.4. Wi-Fi
15.4.1. Wi-Fi network status
In order to view selected network parameters click <Network Status> field.
Displayed window provides the following parameters:
Name
Network
Network status
RSSI
Forget the network
Selected network and parameters set for connection are stored within the
scale program, each time the scale is turned on it connects to the selected
network in accordance with pre-set parameters.
15.4.2. Available networks
The user can view <
Communication> parameter group as described
Tcp /
Port" then you will see window <Port>
Value
-
Connected
- dbm
- %
-
Available networks> detected by the scale.
.
Description
Network name
Network status with values: connected,
disconnected
Signal strength
Disconnection from a selected network
52
Advertisement
Table of Contents
