Carrying Out Animals Weighing Procedure; Working Mode - Vehicle Scale; Working Mode Activating Procedure - RADWAG WLY User Manual

Averaging time
Automatic mode

32.3. Carrying out animals weighing procedure

• Enter the working mode <
32.1 of this user manual,
• Should the tested animal be weighed in a container, load the container
of scale's weighing platform and tare its mass,
• On placing the tested animal on the scale's weighing platform (in the
tarred container), press
message box indicating course of the process,
• The message box contains data on:
o Progress bar indicated in %,
o Value of averaging time interval, set in local parameters,
o
• On completing the measuring process, the value of measured result
is locked in the message box,
• Confirm completing the process by pressing
33. WORKING MODE – VEHICLE SCALE
Working mode <
mass of loads based on weighments carried out on entering and exiting a
weighbridge.

33.1. Working mode activating procedure

• When in the main software window press
top bar of the display which opens a submenu <Working modes>
containing list of available working modes,
key enabling aborting the process,
Vehicle Scale> enables weighing trucks, determining
Declaration of process duration in seconds (from
1s to 90s) – measurements carried out in set time
interval are used to calculate mean value, which is
the result of the measurement
Operation mode, in which the scale automatically
begins the following measuring process, if the load
placed on scale's weighing platform exceeds value
of mass set in LO threshold.
Animal weighing> according to ch.
key (Process start), which displays a
187
key.
pictogram located in the