Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for RADWAG WLY Series
Summary of Contents for RADWAG WLY Series
- Page 2 NOVEMBER 2020...
- Page 3 WLY 20/D2 20kg 0.1g 195x195mm WLY 30/F1/R 30kg 0,5g 300x300mm WLY 30/F1/K 30kg 0,5g 300x300mm WLY 60/C2/R 60kg 400x500mm WLY 60/C2/K 60kg 400x500mm WLY 120/C2/R 120kg 400x500mm WLY 120/C2/K 120kg 400x500mm For detailed technical specifications refer to RADWAG website www.radwag.com/pl/.
- Page 4 PRECAUTIONS Prior to installation, use or maintenance activities, carefully read this user manual. Use the PUE 7.1 Indicator only as intended. Prior to the first use, carefully read this user manual. Use the device only as intended. Place loads in the centre of the weighing pan. Load the weighing pan with loads of gross weight which does not exceed the maximum capacity.
-
Page 5: Table Of Contents
Contents 1. INTENDED USE ..............................6 2. WARRANTY CONDITIONS ..........................6 3. MAINTENANCE..............................7 3.1. Cleaning ABS Components......................... 7 3.2. Cleaning Stainless Steel Components ......................7 4. SERVICE AND REPAIR ............................. 7 5. RECYCLING ............................... 8 6. MECHANICAL DESIGN ............................. 8 6.1. -
Page 6: Intended Use
USB flash drive). 2. WARRANTY CONDITIONS A. RADWAG feels obliged to repair or exchange all elements that appear to be faulty by production or by construction. B. Defining defects of unclear origin and means of their elimination can only... -
Page 7: Maintenance
In case of any sign of damage, it is necessary to disconnect the device form the mains immediately. The damaged component must be replaced or repaired by RADWAG service directly. In case of any problems with correct operation of the scale, contact the closest manufacturer's service point. -
Page 8: Recycling
The user is NOT ALLOWED to carry out any kind of repair of the device himself/herself. Any attempt of scale modification, repair etc., by unauthorized persons, will result with loss of validity of manufacturer-issued certificates, declarations and warranty. 5. RECYCLING WLY scales must be recycled, they are not to be treated as a regular household waste. -
Page 9: Dimensions
6.1. Dimensions Dimensions of WLY/D2 scale Dimensions of WLY/F1 scale Dimensions of WLY/C2 scale... -
Page 10: Connectors
6.2. Connectors 1 – Ethernet RJ45 connector 1 – power supply socket 2 – RS232 (COM1) connector 2 – I/O, RS232 (COM2) connector 3 – USB connector 6.3. RS232 Connector RS232 - DB9/M connector (male), front: Pin2 - RxD Pin3 - TxD Pin4 - +5 V DC Pin5 - GND RS232 - DSUB15/F connector (female), front:... -
Page 11: Technical Specifications
IN/OUT, RS232 - DSUB15/F connector (female), front: Pin1 – GNDWE Pin2 - OUT1 Pin3 - OUT2 Pin4 – COMM Pin6 - IN4 Pin7 - IN3 Pin11 - IN2 Pin12 - IN1 Pin14 - OUT4 Pin15 - OUT3 6.4.1. Technical Specifications Output parameters Output quantity Output type... -
Page 12: Operation Panel
6.5. Operation Panel Keys Press to switch the scale ON/OFF. Press to zero the scale. Press to tare the scale. Press to send the weighing result to a printer or a computer. Press to enter the menu (function button). Programmable key. Programmable key. -
Page 13: Installation
7. INSTALLATION 7.1. UNPACKING AND INSTALLATION 7.1.1. WLY/D2 Series A. Take the device out of the packaging. B. Place the device on a flat and even surface. Keep it far away from any sources of heat. C. Install the weighing pan and the indicator holder in accordance with the figure below: 7.1.2. -
Page 14: Levelling
Mind to keep the key pressed for about 0.7 s. Operation system and RADWAG program are loaded, this is signalled with blinking of red ON/LOAD diode. Upon completed start-up, the home screen is displayed automatically. -
Page 15: Home Screen
8. HOME SCREEN The home screen features 4 sections: a top bar, a weighing result window, a workspace, function buttons. Home screen layout: 8.1. Top Bar The top bar displays the following information: Working mode name and symbol. Log-in entry. Symbol informing that communication with a PC is on. -
Page 16: Weighing Result Window
8.2. Weighing Result Window Weighing result window provides all weighing-related data. 8.3. Workspace The workspace is to be found underneath the weighing result window. The workspace comprises 3 display templates. Graphics at the top inform which of the 3 templates is currently displayed. In order to switch to a different template drag the workspace screen to the left/right respectively. -
Page 17: Return To Weighing
Press to confirm modifications. Press to exit, the parameter remains unmodified. Press to add a database record. Press to disable the selected record. Press to log out. Press to search a particular database record by date. Press to search a particular database record by name. Press to search a particular database record by code. -
Page 18: Weighing
10. WEIGHING Load the weighing pan. Read the result when stability marker is displayed. In order to guarantee a long-term operation, wherein correct measurements are provided, the following principles must be adhered to: Load the weighing pan steadily, avoid applying mechanical shocks. Place the loads centrally on the... -
Page 19: Diagrams Of Connection Cables
11. DIAGRAMS OF CONNECTION CABLES Scale - computer cable (RS232) Scale - printer cable (ZEBRA) Scale - printer cable (EPSON) -
Page 20: Error Messages
I/O cable „Scale-Ethernet” cable is a standard network cable terminated with RJ45 connectors on both ends. 12. ERROR MESSAGES...