Utomatic Triggering Of Cumulative Labels - RADWAG WLY User Manual

Procedure:
• Enter parameters group <
of this manual,
• Enter the required working mode and choose: „
No. of CC labels", then the editing field <No. of CC labels>
with the screen keyboard is opened,
• Enter the required number of cumulative labels and confirm
by pressing
24.6.4. Automatic triggering of cumulative labels
Users have access to the function of automatic triggering of printing
cumulative labels after setting parameters <
< Threshold>.
Procedure:
• Enter <
in chapter 24 of this manual,
• Enter the required working mode and choose: „
C label automatic triggering /
required option:
None
Mass
Number
*) Manual printing of cumulative labels can be done in two ways
depending on the button used:
.
Working modes> parameter group as described
- Cumulative label printout is initiated by pressing
or
- Cumulative label printout is initiated by exceeding the
value set in parameter <
is treated as the total from single weighments,
- Cumulative label printout is initiated by exceeding the
value set in parameter <
is treated as the number of single weighment.
Working Modes> according to ch. 24
Mode" and then set the
*
,
112
Labelling mode /
Mode> and
Labelling mode /
Threshold>. The value
Threshold>. The value