Table of Contents
Advertisement
13.3. Tarring
In order to tare the scale choose a platform on the touch panel if necessary,
put a package on the pan and press
equal zero and following symbols usually appear: Net and
After placing a load on the weight pan net mass will be shown. Tarring is
possible within the whole range of the scale. After unloading the pan the
display shows the tarred value with minus sign.
You can also inscribe tare values to the product database. Every product has
a field "Tare". In that case tare is automatically set to this value after selecting
the product.
Caution:
Tarring cannot be executed when a negative or zero value is being
displayed. In such case the following message will be displayed:
13.4. Inscribing tare
It is possible to inscribe a tare value.
Procedure:
• While in any work mode press
is displayed,
• Inscribe tare and press
• The program returns to weighing and the and the display shows
the entered value with the „–" sign provided there was zero before
on the display.
. You will see the indication
, then the screen keyboard
,
45
.
Advertisement
Table of Contents
