Atabase Of Clients; Atabase Of Dosing Processes - RADWAG WLY User Manual

1) – Variable name dependant on an enabled working mode. In case of working
modes: Weighing, Dosing, Formulation, Density, Animal weighing the variable
takes the name: "Mass". In case of the working mode "Parts counting" the
variable takes the name: "Part mass". In case of the working mode "Percent
setup (Deviations)" the variable takes the name "Standard mass".
2) – The variables accessible only in the working mode "Dosing".
3) – The variable inaccessible for a product in the working mode "Formulation".
4) – The variables accessible for a product only in the working mode "Formulation".
5) – The variables accessible for a product only in the working mode "CPG".
34.7.3. Database of clients
Procedure:
• Enter <
• Enter <
C lient records:
Name
Code
Tax ID
Address
Postal code
City
Discount
Label
34.7.4. Database of dosing processes
Procedure:
• Enter <
Databases> according to ch. 34 of this manual,
Client> and press the required position.
Client's name
Client's code
Client's tax ID
Client's address
Client's postal code
Client's Town/City
Client's discount
Client's label template
Databases> according to ch. 34 of this manual,
208