Time Interval Between Changing Dosage Thresholds; Time Interval Completing Process - RADWAG WPW/E User Manual

24.8.2. Time interval between changing dosage thresholds

By setting <P7.4.2 DELAY> parameter users can set a delay time
between changing dosing thresholds.
Procedure:
• Enter <P7 WORK MODES> and then:
• Using numeric keys inscribe the required value (0 to 60 s)
and confirm by pressing
Return to weighing:
See 11.3.

24.8.3. Time interval completing process

Users can set <P7.4.3 CHUTE TIME> parameter to change time
of completing a process of dosing after indication drops below LO.
Procedure:
• Enter <P7 WORK MODES> and then:
.
- 111 -