Introducing A Series To The Database Of Series; An Example Of Process For Differential Weighing Mode - RADWAG 3Y Series User Manual

25.3. Introducing a series to the Database of Series

Database of series comprises series and samples which are components of a
series.
While creating a series, first set its name, and then add samples to the
created series. The software operates intuitively, and commands a user to
follow displayed information.
Specify a name for each sample. Adding a series to the database can be
carried out from the level of differential weighing mode or from the level of
Database.
Procedure:
Enter submenu <
•
Press <
•
The software automatically adds a new entry to the database and enters its
editing mode. Insert all parameters of a new series.
List of parameters defined for a series:
1. Name: press "Name" field, a window opens for inserting name of a
series
2. Code: for inserting series code
3. Client: enables selecting a client for whom the measurements in a
series are carried out
4. Samples: pressing this field opens a window with list of samples (in
case of a new series the list is empty), add new samples:
a. Press <
to the list. Name of a sample is given automatically (it is editable).
5. Number of samples on edited process, it is updated in real time by the
software on adding a new sample to a series.
Each added sample on the list has its current differential weighing status
displayed (weighing phase carried out for a sample).
Newly added samples do not have a status assigned – the field is empty. The
status is updated in real time after completing each phase of sample's weighing
process.

25.4. An example of process for differential weighing mode

On activating DIFFERENTIAL WEIGHING mode:
• Select information to be displayed in the grey coloured workspace
• Select appropriate quick access keys
• Add a series to balance's memory (a name identifies a series)
• Add samples to a series (a name identifies a sample)
• On adding samples return to the main window of the active working
mode
Databases>, press < Series> field
Add > soft key, should a series be added
Add > field, the software automatically adds a new entry
- 121 -