Local Settings Of The Workign Mode; Reference Unit Mass Estimated By Weighing - RADWAG WPY User Manual

• Choose mode <
returns to the main window displaying icon
• The weight unit is automatically changed to „%" and two screen
buttons on the right side appear:

27.2. Local settings of the workign mode

Local settings of the working mode <
on pressing a hot key <
Save Mode
Down-weighing
Checkweighing
Tare mode
Labelling mode
Statistics

27.3. Reference unit mass estimated by weighing

Procedure:
• Enter <
• If the standard is to be weighed in a container, the container needs
to be put on the pan and tarred,
• Press
<Put standard>,
Deviations>, the program will automatically
Enter reference mass
Estimate reference mass
Local parameters>:
Deviations> according to ch. 27.1 of this manual,
(Estimate standard mass), then a message is displayed:
Deviations> are accessible
Detailed description in ch. 24.2 of the user manual
Detailed description in ch. 24.3 of the user manual
Detailed description in ch. 24.4 of the user manual
Detailed description in ch. 24.5 of the user manual
Detailed description in ch. 24.6 of the user manual
Detailed description in ch. 24.7 of the user manual
98
,
in the top bar