Output Settings - IDK MSD-501 Command Reference Manual

MSD-501/502 Command Guide

3.3.8 Output settings

@GEQ / @SEQ Output equalizer
Function Getting
Format @GEQ
Return value @GEQ, level_1 (, level_2)
Parameter level_1-2: Output equalizer
ch_1-2: Output connector
Example
@GEQ
@GEQ,0,1
@SEQ,1,0
@SEQ,1,0
Remarks Those commands are only for HDMI output connector.
@GDM / @SDM Output mode
Function Getting
Format
@GDM
Return value @GDM, mode_1A, mode_1B
(, mode_2A, mode_2B)
Parameter mode_1A / mode_2A: OUTA output mode
mode_1B / mode_2B: OUTB output mode
mode_1-4: Output mode
ch_1-4: Output connector
Example @GDM
@GDM,3,0,3,3
@SDM,1,3
@SDM,1,3
－
Remarks
46
0 = OFF [Default], 1 = LOW, 2 = MIDDLE, 3 = HIGH
0 = All HDMI output, 1 = OUT1A, 2 = OUT2A
0 = DVI MODE, 1 = HDMI RGB MODE, 2 = HDMI YCbCr4:2:2 MODE,
3 = HDMI YCbCr4:4:4 MODE [Default]
0 = All outputs, 1 = OUT1A, 2 = OUT1B, 3 = OUT2A, 4 = OUT2B
Setting
@SEQ, ch_1, level_1 (, ch_2, level_2)
@SEQ, ch_1, level_1 (, ch_2, level_2)
Getting output equalizer.
OUT1A: OFF; OUT2A: LOW
Setting OUT1A output equalizer to OFF.
Completed normally.
Setting
@SDM, ch_1, mode_1 (, ch_2, mode_2･･･)
@SDM, ch_1, mode_1 (, ch_2, mode_2･･･)
Getting output mode.
OUT1B: DVI MODE; other outputs: HDMI
YCbCr4:4:4 MODE.
Setting OUT1A output mode to "HDMI
YCbCr4:4:4 MODE".
Completed normally.