Cli Command Groups - Edge-Core AS6700-32X Cli Reference Manual

CLI Command Groups

The system commands can be broken down into the functional groups shown
below
.
Table 7: Command Group Index
Command Group
General
System Management
Simple Network
Management Protocol
Remote Monitoring
User Authentication
General Security Measures Segregates traffic for clients attached to common data ports;
Access Control List
Interface
Link Aggregation
Mirror Port
Congestion Control
UniDirectional Link
Detection
Address Table
Spanning Tree
VLANs
Class of Service
Chapter 2
Description
Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
Display and setting of system information, basic modes of
operation, maximum frame size, file management, console
port and telnet settings, system logs, SMTP alerts, and the
system clock,
Activates authentication failure traps; configures community
access strings, and trap receivers
Supports statistics, history, alarm and event groups
Configures user names and passwords, logon access using
local or remote authentication, management access through
the web server, Telnet server and Secure Shell; as well as port
security, IEEE 802.1X port access control, and restricted access
based on specified IP addresses,
and prevents unauthorized access by configuring valid static
or dynamic addresses, web authentication, MAC address
authentication, filtering DHCP requests and replies, and
discarding invalid ARP responses
Provides filtering for IPv4 frames (based on address, protocol,
TCP/UDP port number or TCP control code), IPv6 frames
(based on address, or non-IP frames (based on MAC address or
Ethernet type)
Configures the connection parameters for all Ethernet ports,
aggregated links, and VLANs
Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port trunks
Mirrors data to another port for analysis without affecting the
data passing through or the performance of the monitored
port
Sets the input/output rate limits, traffic storm thresholds, and
thresholds for broadcast and multicast storms which can be
used to trigger configured rate limits or to shut down a port.
Detect and disables unidirectional links
Configures the address table for filtering specified addresses,
displays current entries, clears the table, or sets the aging time
Configures Spanning Tree settings for the switch
Configures VLAN settings, and defines port membership for
VLAN groups
Sets port priority for untagged frames, selects strict priority or
weighted round robin, relative weight for each priority queue,
also sets priority for TCP/UDP traffic types, IP precedence, and
DSCP
– 93 –
| Using the Command Line Interface
CLI Command Groups
Page
95
103
181
203
211
255
335
359
389
409
419
429
437
443
467
507