Example
src-mac
This command adds the source-mac address hash attribute to the hash selection
(MAC Hash)
list. Use the no form to remove the specified attribute.
Syntax
Command Mode
MAC hash selection mode
Example
vlan
This command adds the VLAN hash attribute to the hash selection list. Use the no
(MAC Hash)
form to remove the specified attribute.
Syntax
Command Mode
MAC hash selection mode
Example
dst-ip
This command adds the destination IPv4 address hash attribute to the hash
(IPv4 Hash)
selection list. Use the no form to remove the specified attribute.
Syntax
Command Mode
IPv4 hash selection mode
Console(config)#hash-selection list 1 mac
Console(config-mac-hash-sel)#ethertype
Console#
[no] src-mac
Console(config)#hash-selection list 1 mac
Console(config-mac-hash-sel)#src-mac
Console#
[no] vlan
Console(config)#hash-selection list 1 mac
Console(config-mac-hash-sel)#vlan
Console#
[no] dst-ip
– 811 –
Chapter 29
| IP Routing Commands
Global Routing Configuration