Console#
show interfaces
This command displays the administrative and operational status of the specified
switchport
interfaces.
Syntax
Default Setting
Shows all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Example
This example shows the configuration setting for port 1.
Console#show interfaces switchport ethernet 1/1
Information of Eth 1/1
Broadcast Threshold
Multicast Threshold
Unknown Unicast Threshold
LACP Status
VLAN Membership Mode
Ingress Rule
Acceptable Frame Type
Native VLAN
Priority for Untagged Traffic : 0
Allowed VLAN
Forbidden VLAN
Console#
Up Time
Flow Control Type
Max Frame Size
MAC Learning Status
show interfaces switchport [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-32/54)
port-channel channel-id (Range: 1-16/27)
– 377 –
Chapter 10
: 0w 0d 1h 41m 8s (6068 seconds)
: None
: 1518 bytes (1522 bytes for tagged frames)
: Enabled
: Enabled, 500 packets/second
: Disabled
: Disabled
: Disabled
: Hybrid
: Disabled
: All frames
: 1
:
1(u)
:
| Interface Commands
Interface Configuration