Logging Sendmail - Edge-Core AS6700-32X Cli Reference Manual

Chapter 4
| System Management Commands
SMTP Alerts

logging sendmail

logging sendmail host
Table 25: Event Logging Commands
Command
logging sendmail source-
email
show logging sendmail
This command enables SMTP event handling. Use the no form to disable this
function.
Syntax
[no] logging sendmail
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console(config)#logging sendmail
Console(config)#
This command specifies SMTP servers that will be sent alert messages. Use the no
form to remove an SMTP server.
Syntax
[no] logging sendmail host ip-address
ip-address - IPv4 or IPv6 address of an SMTP server that will be sent alert
messages for event handling.
Default Setting
None
Command Mode
Global Configuration
Command Usage
◆
You can specify up to three SMTP servers for event handing. However, you must
enter a separate command to specify each server.
◆
To send email alerts, the switch first opens a connection, sends all the email
alerts waiting in the queue one by one, and finally closes the connection.
(Continued)
Function
Email address used for "From" field of alert messages
Displays SMTP event handler settings
– 160 –
Mode
GC
NE, PE