Location-Led - Edge-Core AS6700-32X Cli Reference Manual

Chapter 4
| System Management Commands
System Status

location-led

Table 12: System Status Commands
Command
show license file
show location-led status
show memory
show process cpu
show running-config
show startup-config
show system
show tech-support
show users
show version
show watchdog
watchdog software
This command flashes the Locator LED to indicate the unit to which you are
connected.
Syntax
location-led {on | off }
Command Mode
Privileged Exec
Command Usage
The Locator LED is labeled "Loc. " It is located in the upper right corner of the front
panel.
Example
Console#location-led on
Console#
(Continued)
Function
Shows information on the installed license file required for
the network ports
Shows if location LED function is enabled or not
Shows memory utilization parameters
Shows CPU utilization parameters
Displays the configuration data currently in use
Displays the contents of the configuration file (stored in
flash memory) that is used to start up the system
Displays system information
Displays a detailed list of system settings designed to help
technical support resolve configuration or functional
problems
Shows all active console and Telnet sessions, including user
name, idle time, and IP address of Telnet clients
Displays version information for the system
Shows if watchdog debugging is enabled
Monitors key processes, and automatically reboots the
system if any of these processes are not responding
correctly
– 114 –
Mode
PE
PE
NE, PE
NE, PE
PE
PE
NE, PE
PE
NE, PE
NE, PE
PE
PE