Default Setting - Edge-Core AS6700-32X Cli Reference Manual

Chapter 10
| Interface Commands
Interface Configuration

Default Setting

Shows historical statistics for all interfaces, intervals, ingress traffic, and egress
traffic.
Command Mode
Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Example
This example shows the statistics recorded for all named entries in the sampling
table.
Console#show interfaces history ethernet 1/1
Interface : Eth 1/ 1
Name : 15min
Interval : 900 second(s)
Buckets Requested : 96
Buckets Granted : 7
Status : Active
Current Entries
Start Time %
------------ ------ --------------- ------------- ------------- ------------
00d 01:45:01 0.00
Discards
------------- ------------- -------------
%
------ --------------- ------------- ------------- -------------
0.00
Discards
------------- -------------
Interface : Eth 1/ 1
Name : 1day
Interval : 86400 second(s)
Buckets Requested : 7
Buckets Granted : 0
Status : Active
Current Entries
Start Time %
------------ ------ --------------- ------------- ------------- ------------
00d 00:00:00 0.00
Discards
------------- ------------- -------------
%
------ --------------- ------------- ------------- -------------
0.00
Octets Input Unicast
105421
Errors Unknown Proto
0 0
Octets Output Unicast
859987
Errors
0 0
Octets Input Unicast
969845
Errors Unknown Proto
7 0
Octets Output Unicast
8455699
– 374 –
Multicast Broadcast
688 30
0
Multicast Broadcast
947 373
Multicast Broadcast
6548 237
0
Multicast Broadcast
9101 3146
8
1
82
3