Cli Command Groups; Table 35: Command Group Index - Edge-Core ES3510MA Management Manual

| Using the Command Line Interface
C 19
HAPTER

CLI Command Groups

CLI C G
OMMAND ROUPS
The system commands can be broken down into the functional groups
shown below
.

Table 35: Command Group Index

Command Group Description
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
System Management Display and setting of system information, basic modes
of operation, maximum frame size, file management,
console port and telnet settings, system logs, SMTP
alerts, the system clock, and switch clustering
Simple Network Activates authentication failure traps; configures
Management Protocol community access strings, and trap receivers
Remote Monitoring Supports statistics, history, alarm and event groups
User Authentication Configures user names and passwords, logon access
using local or remote authentication, management
access through the web server, Telnet server and
Secure Shell; as well as port security, IEEE 802.1X port
access control, and restricted access based on
specified IP addresses
General Security Segregates traffic for clients attached to common data
Measures ports; and prevents unauthorized access by
configuring valid static or dynamic addresses, web
authentication, MAC address authentication, filtering
DHCP requests and replies, and discarding invalid ARP
responses
Access Control List Provides filtering for IPv4 frames (based on address,
protocol, TCP/UDP port number or TCP control code), or
non-IP frames (based on MAC address or Ethernet type)
Interface Configures the connection parameters for all Ethernet
ports, aggregated links, and VLANs
Link Aggregation Statically groups multiple ports into a single logical
trunk; configures Link Aggregation Control Protocol for
port trunks
Mirror Port Mirrors data to another port for analysis without
affecting the data passing through or the performance
of the monitored port
Rate Limit Controls the maximum rate for traffic transmitted or
received on a port
Automatic Traffic Control Configures bounding thresholds for broadcast and
multicast storms which can be used to trigger configured
rate limits or to shut down a port
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
Spanning Tree Configures Spanning Tree settings for the switch
VLANs Configures VLAN settings, and defines port membership
for VLAN groups; also enables or configures private
VLANs, protocol VLANs, voice VLANs, and QinQ tunneling
Class of Service Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for each
priority queue, also sets priority for DSCP
Quality of Service Configures Differentiated Services
– 482 –
Page
485
493
555
575
583
637
683
699
717
727
737
739
753
757
781
817
831